TC7SZ00FE 2009-09-09 1 toshiba cmos digital integrat ed ci rcuit silicon monolithic TC7SZ00FE 2-input nand gate features ? high output current : 24 ma (min) at v cc = 3 v ? super high speed operation : t pd = 2.4 ns (typ.) at v cc = 5 v, 50pf ? operating voltage range : v cc = 1.65 to 5.5 v ? 5.5-v tolerant inputs ? 5.5-v power down protection output ? matches the performance of tc 74lcx series when operated at 3.3- v v cc marking pin assignment (top view) absolute maximum ratings (ta = 25c) characteristics symbol rating unit supply voltage v cc ?0.5 to 6 v dc input voltage v in ?0.5 to 6 v ? 0.5 to 6 (note 1) dc output voltage v out ? 0.5 to v cc +0.5 v (note 2) v input diode current i ik ?20 ma output diode current i ok ? 20 (note 3) ma dc output current i out 50 ma dc v cc /ground current i cc 50 ma power dissipation p d 150 mw storage temperature t stg ?65 to 150 c lead temperature (10 s) t l 260 c note: using continuously under heavy loads (e.g. the application of high temperatur e/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operat ing temperature/current/voltage, etc. ) are within the absolute maximum ratings and the operating ranges. please design the appropriate reliability upon reviewing the toshiba semiconductor reliability handbook (?handling precautions?/derating concept and methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). note 1: v cc = 0v note 2: high or low state. do not exceed i out of absolute maximum ratings. note 3: v out < gnd (esv) weight: 0.003 g (typ.) j 1 product name 5 v cc 4 out y in a 2 gnd 3 in b 1
TC7SZ00FE 2009-09-09 2 iec logic symbol truth table a b y l l h l h h h l h h h l operating ranges characteristics symbol rating unit 1.65 to 5.5 supply voltage v cc 1.5 to 5.5 (note 4) v input voltage v in 0 to 5.5 v 0 to 5.5 (note 5) output voltage v out 0 to v cc (note 6) v operating temperature t opr ?40 to 85 c 0 to 20 (v cc = 1.80 v 0.15 v, 2.5 v 0.2 v) 0 to 10 (v cc = 3.3 v 0.3 v) input rise and fall time dt/dv 0 to 5 (v cc = 5.0 v 0.5 v) ns/v note 4: data retention only note 5: v cc = 0 v note 6: high or low state out y in a & in b
TC7SZ00FE 2009-09-09 3 electrical characteristics dc electrical characteristics ta = 25c ta = ? 40 to 85c characteristics symbol test condition v cc (v) min typ. max min max unit 1.65 to 1.95 v cc 0.75 ? ? v cc 0.75 ? high level v ih ? 2.3 to 5.5 v cc 0.7 ? ? v cc 0.7 ? 1.65 to 1.95 ? ? v cc 0.25 ? v cc 0.25 input voltage low level v il ? 2.3 to 5.5 ? ? v cc 0.3 ? v cc 0.3 v 1.65 1.55 1.65 ? 1.55 ? 2.3 2.2 2.3 ? 2.2 ? 3.0 2.9 3.0 ? 2.9 ? i oh = ?100 a 4.5 4.4 4.5 ? 4.4 ? i oh = ? 4 ma 1.65 1.29 1.52 ? 1.29 ? i oh = ? 8 ma 2.3 1.9 2.15 ? 1.9 ? i oh = ? 16 ma 3.0 2.4 2.8 ? 2.4 ? i oh = ? 24 ma 3.0 2.3 2.68 ? 2.3 ? high level v oh v in =v ih or v il i oh = ? 32 ma 4.5 3.8 4.2 ? 3.8 ? 1.65 ? 0 0.1 ? 0.1 2.3 ? 0 0.1 ? 0.1 3.0 ? 0 0.1 ? 0.1 i ol = 100 a 4.5 ? 0 0.1 ? 0.1 i ol = 4 ma 1.65 ? 0.08 0.24 ? 0.24 i ol = 8 ma 2.3 ? 0.1 0.3 ? 0.3 i ol = 16 ma 3.0 ? 0.15 0.4 ? 0.4 i ol = 24 ma 3.0 ? 0.22 0.55 ? 0.55 output voltage low level v ol v in = v ih i ol = 32 ma 4.5 ? 0.22 0.55 ? 0.55 v input leakage current i in v in = 5.5 v or gnd 0 to 5.5 ? ? 1 ? 10 a power off leakage current i off v in or v out = 5.5v 0.0 ? ? 1 ? 10 a quiescent supply current i cc v in = 5.5 v or gnd 5.5 ? ? 2 ? 20 a
TC7SZ00FE 2009-09-09 4 ac characteristics (unless otherwise specified, input: t r = t f = 3 ns) ta = 25c ta = ? 40 to 85c characteristics symbol test condition v cc (v) min typ. max min max unit 1.80 0.15 2.0 4.5 9.6 2.0 9.8 2.5 0.2 0.8 3.2 5.3 0.8 5.7 3.3 0.3 0.5 2.4 3.7 0.5 4.0 c l = 15 pf, r l = 1 m 5.0 0.5 0.5 1.9 2.9 0.5 3.2 3.3 0.3 1.5 3.0 4.6 1.5 4.9 propagation delay time t plh t phl c l = 50 pf, r l = 500 5.0 0.5 0.8 2.4 3.6 0.8 3.9 ns input capacitance c in ? 0 to 5.5 ? 4 ? ? ? pf 3.3 ? 19 ? ? ? power dissipation capacitance c pd (note 7) 5.5 ? 27 ? ? ? pf note 7: c pd is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. average operating current can be obtained by the equation. i cc (opr.) = c pd ?v cc ?f in + i cc
TC7SZ00FE 2009-09-09 5 package dimensions weight: 0.003 g (typ.)
TC7SZ00FE 2009-09-09 6 restrictions on product use ? toshiba corporation, and its subsidiaries and affiliates (colle ctively ?toshiba?), reserve the right to make changes to the information in this document, and related hardware, softwa re and systems (collectively ?product?) without notice. ? this document and any information herein may not be reproduc ed without prior written permission from toshiba. even with toshiba?s written permission, reproduc tion is permissible only if reproducti on is without alteration/omission. ? though toshiba works continually to improve product?s quality and reliability, product can malfunction or fail. customers are responsible for complying with safety standards and for prov iding adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid sit uations in which a malfunction or failure of product could cause loss of human lif e, bodily injury or damage to property, including data loss or corruption. before creating and producing designs and using, custom ers must also refer to and comply with (a) the latest versions of all relevant toshiba information, including without limitation, t his document, the specifications, the data sheets and application notes for product and the precautions and conditions set forth in the ?toshiba semiconductor reliability handbook? and (b) the instructi ons for the application that product will be used with or for . customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this product in such design or applications; (b ) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application c ircuits, or any other referenced documents; and (c) validating all operating parameters for su ch designs and applications. toshiba assumes no liability for customers? product design or applications. ? product is intended for use in general el ectronics applications (e.g., computers, personal equipment, office equipment, measur ing equipment, industrial robots and home electroni cs appliances) or for specif ic applications as expre ssly stated in this document . product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality a nd/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or se rious public impact (?unintended use?). unintended use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devi ces, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. do not use product for unintended use unless specifica lly permitted in this document. ? do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy product, whether in whole or in part. ? product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. ? the information contained herein is pres ented only as guidance for product use. no re sponsibility is assumed by toshiba for an y infringement of patents or any other intellectual property rights of third parties that may result from the use of product. no license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. ? absent a written signed agreement, except as pr ovided in the relevant terms and conditions of sale for product, and to the maximum extent allowable by law, toshiba (1) assumes no liability whatsoever, including without limitation, indirect, co nsequential, special, or incidental damages or loss, including without limitation, loss of pr ofits, loss of opportunities, business interruption and loss of data, and (2) disclaims any and all express or implied warranties and conditions related to sale, use of product, or information, including warranties or conditions of merchantability, fitness for a particular purpose, accuracy of information, or noninfringement. ? do not use or otherwise make available product or related so ftware or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or m anufacturing of nuclear, chemical , or biological weapons or missi le technology products (mass destruction w eapons). product and related software and technology may be controlled under the japanese foreign exchange and foreign trade law and the u.s. export administration regulati ons. export and re-export of product or related software or technology are strictly prohibi ted except in compliance with all applicable export laws and regulations. ? please contact your toshiba sales representative for details as to environmental matters such as the rohs compatibility of product. please use product in compliance with all applicable laws and regulations that regulate the inclusion or use of contro lled substances, including without limitation, the eu rohs directive. toshiba assumes no liability for damages or losses occurring a s a result of noncompliance with applicable laws and regulations.
|
